Fire Proof Cable

LOW SMOKE & ZERO HALOGEN EMISSIONS UNDER FIRE CONDITIONS.
Introducing Shield Fire Proof Cable – independently approved by LPCB to meet all re and fume emission testing detailed by BS 5839-1:2013.

Certied by LPCB to meet re test Standards – BS EN 50200:2006 + Annex E 30 minutes, BS EN 50200 PH30 & BS 6387:2013 (Catagory CWZ). It is also fully approved to the Low Smoke & Zero Halogen requirements detailed by BS 5839-:2013 & BS 7629-1:2008.

EMERGENCY LIGHTING SYSTEMS
Many Emergency Lighting Systems now require a Fire Performance cable to meet BS EN 50200:2006 PH30 – fire performance test. Shield fire proof cable is certied by LPCB to meet the required duration to PH30, 30 minutes duration.

Be Safe – Insist on Shield Fire Cable for all Emergency Lighting Systems.

THE FASTEST FIRE CABLE TO INSTALL
Shield Fire Proof Cable is available in a variety of multiple core combinations all with CPC (circuit protection conductor). 500m reels and other special lengths are available.

Supplied on robust plastic reels.
Installer safe and easy handling.
Better reeling and damage resistant.
Weather and moisture resistant.

Features

Reduced Installation time and costs.
Easy to install and Superb Working Flexibility.
All in one – Easy to Strip Outer Sheath.
No Separate Foil.
No Additional Fibre Wraps.
No mica tape on conductors.
No additional core separators to remove.
Cable Construction Provides High Level Data Protection.

Specifications

LPCB approved to

Fire Resistance Standard	BS EN 50200:2006 +Annex E 30 mins
Fire Resistance Standard	BS EN 50200:2006 PH30
Fire Resistance Standard	BS 6387:2013 Catagory CWZ
Fire Resistance Standard	BS 5839-1:2013 (Clause 26.2d Standard)
Halogen Emission Standard	BS EN 50267-2-1:1999
Low Smoke Standard	BS EN 61034-2:2005
Low Smoke Standard	BS 7629-1:2008

Also for use with

Emergency Lighting	BS 5266-1:2005
Voice Alarm Systems Standard	BS 5839-8:2008
Voice Communication Standard	BS 5839-9:2003
Risk Assessment May Demand Mechanical Protection)

Materials

Drain Wire	0.80mm Dia (0.50mm2) Tinned Copper
Conductors	Bare Copper
Core Installation	Fire Resistant ZHLS Silicone E12
Screening	Aluminium Tape
Outer Sheath	Low Smoke Halogen Free Thermoplastic LTS3

Working Voltage

Core to Core	500V
Core to CPC	300V

Types

Outer Sheath Colours	Red, White
Number of Cores	2 Core
Inner Cores CSA	1.5, 2.5mm CSA

Resistance

1.5mm CSA	12.1 Ohms / 1 Km
2.5mm CSA	7.41 Ohms / 1 Km

Minimum Bend Radius

Radius = 6 x Diameter

Operating Temp.

Minimum/Maximum

– 40°C to +90°C

Installation Temp.

Minimum/Maximum

0°C to +70°C

Voltage Drop. (DC or Single Phase AC)

1.5 mm CSA	29 Ohms mV / A / m
2.5 mm CSA	18 Ohms mV / A / m

Approximate Overall Diameter

2 Core

1.5 mm / 7.40 mm
2.5 mm / 8.00 mm

Approximate Weights

2 Core with CPC

1.5 mm 9.5 Kg / 100 m
2.5 mm 14.1 Kg / 100 m

Current Rating
(Current Ratings listed are at 30°C, Refer to BS7671/EE Wiring Regulations for de-rating factor)

Cable Clipped (DC or Single Phase AC)	1.5 mm 19.5 A 2.5 mm 27 A
Enclosed (DC or Single Phase AC)	1.5 mm 16.5 A 2.5 mm 23 A

Insulation Resistance

10MÙ> at 5000V d.c.

Capacitance Rating

1.5 mm CSA 2 Core & CPC	Core to Core – Average 70 pF/m Core to Screen – Average 130 pF/m
2.5 mm CSA 2 Core & CPC	Core to Core – Average 80 pF/m Core to Screen – Average 145 pF/m

Warranty

Period Identification

10 Years from Date of Manufacture
Date of Manufacture Marked On Cable

Newsletter Subscription

Fire Proof Cable

Features

Specifications

NOTICE

Login